Z-axis
-
Grab the Z-axis assembly. Rotate the Z-axis coupler, so the gantry bottoms out. Look at the back – you should now have access to the four (4) router mount holes.
-
Assemble the router mount using four (4) M5-25mm screws.
-
From the back of the machine, fasten the entire Z-axis assembly onto the X gantry using four (4) M5-12mm screws by loosely installing all four (4) screws, then fully secure them.
-
To finish up the router mount, loosely fasten the front half of the router mount using the two (2) M5-25mm screws.
-
Grab your router and slide it through the router mount from above, then secure it in place using the two (2) pre-installed screws, with an Allen key.
